Repairing pond liner

Free 2-day Shipping On Millions of Items. If the damage to the pond liner is extensive, or if the liner is very low quality, replacing it with a high quality liner may be the best solution long-term. This is probably overkill for ponds with small tears as a repair patch is likely. A more DIY version of fixing your pond liner is to use a patch of pond liner and some pond sealant.

It even works underwater, ideal for repairing a pond without draining it. Learn to repair a puncture, hole or tear in your liner.

To repair the liner , you may need to drain your pond first if the damage is near the bottom of your pond. How to patch pond liner? When repairing a Butyl or Epalyn rubber liner , clean the liner with a rubber pad and clean water. Works on PVC, Butyl Rubber, Butyl Epalyn, EPDM and Firestone.

We shop and deliver, you enjoy. Butyl rubber or polythene pond liners are easy enough to repair you take care and do the job properly. Finding the leak is probably the most difficult part of the operation. The easiest way to find a leak with a butyl liner , is simply let the water find its leaking level.

Just received and applied this liner patch to my pond liner.

Basically cut to size, rub the primer on, then stick on patch and roll it. Ways to fix pond liner. One way to fix a pond liner water leak is the same way you would patch a pool.

Or even with tools from a pond repair kits that come supplied with the preformed ponds. This pond liner repair kit contains all you need to quickly and easily repair minor damages to your liner. The bump will look like a deformed shallow spot in your pond. The best way is to drain the water down to expose the leak. The liner is most likely going to have muck and algae on it which will have to be scrubbed off.

Number four, check that underlayment. You may find that you not only need a new liner , but the underlayment is deteriorated as well. Since you’re replacing the pond liner , you might as well replace the underlayment too. Avoid using old carpet as u8nderlayment. Not only is it not the right product for the job, but it’s messy and unprofessional.

This method uses a piece of Firestone or SealEco EPDM pond liner which is then attached to the original pond liner. This method can be used for multiple, larger holes and tears. Or, QuickSeam Tape QuickPrime Plus QuickScrubber Pad. It might take two or more people to do this, depending on the size of the pond.

Check the bottom of the pond underneath where the liner was for stones, tree roots or anything that could penetrate the new liner.

Lay a 2-inch layer of sand on the bottom of the pond hole. Pond Liner Patch Repair. Place the new liner in the pond. Get Same Day Delivery, no membership needed.