Antler repairs

An antler is easily repaired using repair or automotive putty. Glue on a broken or replacement part from a spare antler using the putty. If you do not have the broken part or a replacement part, an antler point can be sculpted with the putty. Broken beams, tips and tines are nature’s consequence of deer living in the wild.

Repairs are bonded to the original antler with a post, for a durable and lasting repair.

Next, all the fine details of your antler are meticulously hand sculpted back into place. Can you repair an antler? How to repair a broken antler? What is warranty antler? WHITETAIL DESIGNER SYSTEMS.

For this repair , drill an over-sized hole into the antler. Fill the hole with body filler.

As soon as the hole is fille insert twisted gauge copper wire. Hold in place until body filler “kicks” or becomes firm. The antler repair kit works great. My grand daughter accidentally shot one of the tines off of her nice 4xmule deer buck. Luckily we found the point and used the kit to reattach it and fill in the missing parts.

It came out so well that no one could tell where the damage had been. A great and easy to use product. I highly recommend it.

For main beam repairs or total antler reconstructions, we will need to see the rack and then we will quote the job. We can very accurately recreate antlers by either molding them for a duplicate of an existing rack or we can even recreate antlers from photos or even just measurements. The hardest part of antler repair is most often the staining or painting of the repair so it does not appear repaired.

By using the different colors you can achieve fantastic ! The main thing to remember is to prime the area first with a white primer. Please refer to the list below for authorised luggage repairers around Australia. Please be sure to bring your proof of purchase.

Repairers will assess the damage as covered under warranty or quote any repairs required for non-warranty issues.

Shipping fees to and from our repair centre may apply). The warranty does not cover damage due to general wear and tear. The first thing that I did was assess why the repair job failed so that. After the epoxy I used to set the wire cure I began the process of building up the tine with two-part.

Iowa Timber FREAKS 12views. First, determine the length needed and cut a piece of 10-gauge wire to the length plus an inch and a half that will be imbedded in the antler. Drill a hole in the antler and secure the wire with minute epoxy. Once the epoxy has cure bend the wire to match the curve of the other tines. Next mix up some Fixit Paste.

Before and after's of a repair. Left side antler tip was broken off and right side was kind of funky. Antler Trader 16views. Seemed like the G-and the main beam tip never really developed or hardened and was rubbed down to nubs. Today at Five Point Studio, we repair, restore and reconstruct antlers, horns, osteological and paleo artifacts.

We welcome you to look through our website for information and samples of our work. The repaired rack was flawless. Neither Joe nor his client could identify a broken joint or pick out a color imperfection on the entire rack.

This would then need to be sealed before painting, IMO.